(* Discounts applicable only on minimum order. For more details Contact us)
(* Transportation charges at actuals)
JOTA001 | |
| 390 | |
| Each Pack Contains 5 Pcs of Burs | |
5 Pack |
| 508- Chamfer Preparation | |
| When you want to prepare perfect Chamfer for your crown and bridge this is special bur with non-cutting tip which control the cutting. Finally you get perfect Chamfer smooth FInish. |
Size/sku |
Avl Qty (Pack) | |
508FFG020 |
4 | |
508GFG020 |
0 |
| 525 - Special Bur | |
| It is special similar to inverted cone bur today because of composite no deep under is made. This make a very mild under cut for retention. EF (extra fine) gives smooth finish for Bonding. |
Size/sku |
Avl Qty (Pack) | |
525 FG 017 |
7 | |
525EF FG 017 |
0 |
| 526 - Special Bur | |
| Specially made to round off the margin cutting edge with groove very special design. |
Size/sku |
Avl Qty (Pack) | |
526 FG 023 |
0 |
.jpg)
| 801- Spherical (Round) | |
| Special round bur highest quality round bur, smallest size up to 009 is available for CA handpiece extensively used by students in the pre-clinical work |
Size/sku |
Avl Qty (Pack) | |
801 FG SH 012 |
500 |
| 802L – Spherical with Conical | |
| Special with conical collar (long). This performs as round bur as well as cavity enlarging bur because of long coated collar. It does 2 in function in the preparation of cavity |
Size/sku |
Avl Qty (Pack) | |
802LG FG 012 |
500 |
| 805 - Inverted conical | |
| Very standard bur, full range is available, even short for pediatric patients. Student bur RA of all size 008 to 0012. Specially for students preclinical work. It is definitely top class product. |
Size/sku |
Avl Qty (Pack) | |
805 FG 014 |
3 | |
805FGSH 010 |
39 | |
805 FG SH 012 |
500 |
| 807 - Inverted Conical | |
| This specialized inverted cone, it does not create deep groove specially designed for cavity preparation, it produce limited undercut with undercut, it also produce cavity by cutting lateral wall with minimum undercut. Fast cutting, perfect cavity. |
Size/sku |
Avl Qty (Pack) | |
807FG 016 |
39 |
| 808L - Inverted Conical Convex End (round edges) | |
| Inverted conical convex end (round edge). It is same function as 807. It has smooth end so the cavity wall will be smooth. We also have EF (extra fine) for perfect smooth wall where composite bonding will be perfect. |
Size/sku |
Avl Qty (pack) | |
808L FG 014 |
1000 | |
808LEFFG014 |
9 | |
808RL FG 012 |
39 | |
808RL FG 014 |
50 |
| 809- Inverted conical convex end | |
| Specially designed for small cavity only size-10 class 5 cavity where you are greatly concerned about the depth of cavity, not go deep this convex end. Gives good finish. |
Size/sku |
Avl Qty (Pack) | |
809FG 010 |
200 |
| 819 - Wheel with collar | |
| For fast reduction of any surface this is fine wheel with collar. Reduction very smooth and well controlled |
Size/sku |
Avl Qty (Pack) | |
819FG 014 |
100 |
| 830 - Bud slender | |
| Fast cutting, reducing any area of the teeth specially lingual surface cuspal area, very useful for crown and bridge practice |
Size/sku |
Avl Qty (Pack) | |
830 FG 018 |
500 |
| 834 Instrument for depth marking | |
| In crown and bridge practice evaluation of the crown material to be removed is a big challenge, depth marking plays a major role. You can mark the depth, the material to be removed from the crown, then you can remove the material using 837 X L or any other burs. 837L or many more burs can be used. |
Size/sku |
Avl Qty (Pack) | |
834 FG 018 |
250 |
| 835 Cylindrical and end cutting | |
| In crown and bridge when you want to reduce the crown, side cutting along with end cutting plays major role to create perfect margin which is most important for the retention |
Size/sku |
Avl Qty (Pack) | |
835FG008 |
150 | |
835FG012 |
50 |
| 836 - Cylinder | |
| It can be used in crown reduction more used in cavity cutting, 014 is ideal size for cavity fast cutting. We also have students burs 008 to 010 for cavity cutting of model. |
Size/sku |
Avl Qty (Pack) | |
836 FG SH 014 |
1000 |
| 837 - Cylindrical side and end cutting | |
| Same function as 835 but has longer cutting area for faster preparation. This also end cutting to great perfect margin. This also short shaft to use in molar and for pedo |
Size/sku |
Avl Qty (Pack) | |
837 FG SH 012 |
1000 |
| 837L-Cylindrical side and end cutting | |
| Excellent bur for crown and bridge practice |
Size/sku |
Avl Qty (Pack) | |
837L FG 012 |
0 |
| 837XL-Cylindrical side and end cutting | |
| Really long cutting area unparalleled bur for crown and bridge practice in shortest time you can finish your work |
Size/sku |
Avl Qty (Pack) | |
837XL FG 014 |
0 |
| 838L Cylindrical end Hemispherical | |
| For reduction of surface area without disturbing margin |
Size/sku |
Avl Qty (Pack) | |
838L FG 012 |
0 | |
838L FG 014 |
700 |
| 839 Cylindrical end cutting only | |
| Unique bur to prepare the margin does not have any cutting area other than in the end, you can use it for creating excellent smooth margin for the retention of crown |
Size/sku |
Avl Qty (Pack) | |
839 FG 012 |
700 |
| 846 - Conical (Truncated | |
| Same function as 835 but has longer cutting area for faster preparation. This also end cutting to great perfect margin. This also short shaft to use in molar and for pedo. |
Size/sku |
Avl Qty (Pack) | |
846 FG 012 |
200 | |
846 FG 014 |
50 |
.jpg)
| 847 -Conical (Truncated) | |
| This is tapering fissure bur for cavity preparation, we have R A Bur 008 to 016 for students, cavity preparation for preclinical |
Size/sku |
Avl Qty (Pack) | |
847 FG 016 |
400 |
| 848 R- Cylindrical pointed slender | |
| It is excellent bur for surface finish. If you want finish by low speed surface you can use R A Bur 8484 R, long conical rounded edge, long cutting area, rounded edge does not disturb the margin |
Size/sku |
Avl Qty (Pack) | |
848R FG 016 |
250 |
| 850 - Conical end domed | |
| Used in gross reduction, doomed end does not disturb the margin. RA bur can be used for finish or even for cavity cutting. |
Size/sku |
Avl Qty (Pack) | |
850 FG 012 |
2 | |
850 FG 014 |
15 |
| 851 Conical domed side cutting only | |
| Mainly used in surface reduction without disturbing margin |
Size/sku |
Avl Qty (Pack) | |
851 FG 014 |
1000 | |
851 FG 016 |
300 |
| 852 conical end domed | |
| Extremely used in the proximal area. |
Size/sku |
Avl Qty (Pack) | |
852 FG 012 |
28 |
| 852L Conical Domed | |
| Extremely used in the proximal area |
Size/sku |
Avl Qty (Pack) | |
852L FG 014 |
39 |
| 858 Domical Pointed | |
| Excellent to use in the proximal area and also to cut the contact point |
Size/sku |
Avl Qty (Pack) | |
858 FG 012 |
0 | |
858 FG 014 |
0 |
| 859 - Pointed | |
| Finest bur specially for breaking contact area and finish proximal area |
Size/sku |
Avl Qty (Pack) | |
859 FG 012 |
1000 |
| 862 - Flame | |
| Good for surface reduction. |
Size/sku |
Avl Qty (Pack) | |
862F FG 010 |
0 | |
862F FG 016 |
22 |
| 863 - Cylindrical End pointed long | |
| Crown cutting bur |
Size/sku |
Avl Qty (Pack) | |
863 FG 012 |
20 | |
863 FG 014 |
39 | |
863 FG 016 |
39 |
| 868 – Torpedo Cylindrical | |
| Fast cutting bur in the crown and bridge technique |
Size/sku |
Avl Qty (Pack) | |
868 FG 012 |
50 | |
868 FG 014 |
39 |
| 869 – Torpedo Cylindrical | |
| Great bur having long cutting area for crown cutting. |
Size/sku |
Avl Qty (Pack) | |
869 FG 014 |
700 |
| 871 - Conical Domed Ellipsoidal end Standard | |
| Crown cutting to reduce the proximal area. |
Size/sku |
Avl Qty (Pack) | |
871 FG 012 |
700 |
| 877 - Torpedo Conical | |
| Fast cutting bur having short shank. Can be used for difficult area such as 2nd and 3rd molar |
Size/sku |
Avl Qty (Pack) | |
877 FG 014 |
500 | |
877 FGSH 012 |
300 | |
877 FGSH 014 |
300 |
| 879 - Torpedo Conical | |
| Fast cutting bur for crown and bridge. |
Size/sku |
Avl Qty (Pack) | |
879 FG 014 |
1000 | |
879 FG 016 |
1000 | |
879 FG 018 |
150 |
| 881 - Cylindrical end Hemispherical | |
| Long cutting area end hemispherical. Good for crown reduction without disturbing margin |
Size/sku |
Avl Qty (Pack) | |
881 FG 012 |
60 | |
881 FG 014 |
200 |
| 885 Cylindrical End conical Pointed | |
| It is for crown cutting, great reduction |
Size/sku |
Avl Qty (Pack) | |
885 FG 012 |
17 | |
885 FG 014 |
10 | |
885 FGSH 012 |
150 |
| 888 - Pointed long | |
| Specially useful in proximal cutting and reduction. It has long cutting area. Perfectly pointed. |
Size/sku |
Avl Qty (Pack) | |
888 FG 012 |
250 | |
888 FG 014 |
250 |
| 895 - Bullet | |
| Very useful for gross reduction specially lingual surface, cuspal area. It is also available for RA which can be used for polishing of filling or zirconia etc. |
Size/sku |
Avl Qty (Pack) | |
895 FG 016 |
200 |
| 893 - HEF Special | |
| This is very special bur to finish the margin of the cavity to finish sharp margin. It has very special shape to reach the margin. |
Size/sku |
Avl Qty (Pack) | |
893HEF FG 023 |
250 |
Micro diamond play a great role. We have 4 size, it really lasts long
Micro diamond instruments have great role to play in finish the finish cavity than they can reach to any area. They can also be used to finishing your restoration including zirconia. You can create any grow or fine reduction. The grit area for fine polish. You really want to finish any restoration or any crown or bridge to perfection.
FG007 | |
| 390 | |
| Each Pack Contains 5 Pcs of Burs | |
5 Pack |
| 138 - Cylinder, End domed |
Size/sku |
Avl Qty (Pack) | |
138 FG MICI 007 |
15 |
| 194 - Flame |
Size/sku |
Avl Qty (Pack) | |
194 FG 007 |
39 |
| 277 - Egg |
Size/sku |
Avl Qty (Pack) | |
277 FG 009 |
20 |
| 295 - Flame |
Size/sku |
Avl Qty (Pack) | |
295 FG 007 |
20 |
Carbide Burs are from Jota of great quality. If you are looking fast cutting, perfect finish, pain free cutting carbide is the best. Cutting edges are so sharp. There is always cut and release system so heat developed is minimum cutting is faster, good cooling effect will be there. C1 is round we have for FG and also for CA.
CFG01 | |
| 390 | |
| Each Pack Contains 5 Pcs of Burs | |
5 Pack |
.jpg)
| C1 - Spherical (Round | |
| If you are looking fast cutting, perfect finish, pain free cutting carbide is the best. Cutting edges are so sharp. There is always cut and release system so heat developed is minimum cutting is faster, good cooling effect will be there. C1 is round we have for FG and also for CA. |
Size/sku |
Avl Qty (Pack) | |
C1 FG 010 |
150 | |
C1 FG 012 |
100 | |
C1FG014 |
100 | |
C1FG16 |
100 | |
C1FG118 |
60 |
| C1S - Round |
Size/sku |
Avl Qty (Pack) | |
C1S FG 012 |
1 |
| C2 - Inverted Cone | |
| We also have for RA. |
Size/sku |
Avl Qty (Pack) | |
C2 FG 012 |
5 |
-.jpg)
| CQ1 - Spherical (Round) | |
| Very special bur with cross cut, high efficiency cutting. You cut the cavity in no time, pain free, rapid cutting |
Size/sku |
Avl Qty (Pack) | |
CQ1 FG 010 |
400 | |
CQ1 FG 012 |
250 | |
CQ1 FG 014 |
1000 |
| C7 - Pear | |
| Fastest cutting you can use it for metal cutting to remove the fitting or to even cut the bridge |
Size/sku |
Avl Qty (Pack) | |
C7 FG 010 |
1000 |
| C21L Cylindrical side & End cutting | |
| Longest cutting area in carbide side cutting and also end cutting. It has a great role in crown and bridge practice, once you start using carbide in your practice you really enjoy. |
Size/sku |
Avl Qty (Pack) | |
C21L FG 012 |
500 |
| C31 – Fussier Cylindrical (side and end cutting) | |
| This can be used even cavity cutting or crown and bridge. |
Size/sku |
Avl Qty (Pack) | |
C31 FG 012 |
233 | |
C31 FG 014 |
39 |
.jpg)
| C33 - Conical (Truncated) | |
| This is tapering used mainly in cavity cutting, can also be used for surgical |
Size/sku |
Avl Qty (Pack) | |
C33 FG 010 |
45 |
| Cx21 - Cylindrical side and end cutting | |
| Crown and bridge. |
Size/sku |
Avl Qty (Pack) | |
CX21 FG 012 |
165 |
| C47L - Pear | |
| Fast cutting bur can be used for any having reduction |
Size/sku |
Avl Qty (Pack) | |
C47L FG 012 |
165 |
| C49 Cylindrical side & End cutting | |
| Specially used for crown and bridge side and end cutting. You can finish your work within no time. |
Size/sku |
Avl Qty (Pack) | |
C49 FG 010 |
500 |
| C133 – Conical pointed | |
| Proximal cutting contact point, finest, fast cutting bur. |
Size/sku |
Avl Qty (Pack) | |
C133 FG 010 |
171 |
| C245K – Torpedo Conical | |
| Very special bur having longest cutting edge every clinic should have this for crown and bridge. Specially for implant, you want to cut the crown in no time you can finish it. It is versatile bur, very rare bur. |
Size/sku |
Avl Qty (Pack) | |
C245K FG 018 |
171 |
| C75 - Carbide Cutter |
Size/sku |
Avl Qty (Pack) | |
C75HP070 |
125 |
It is again round it perfectly round.
FG06 | |
| 390 | |
| Each Pack Contains 5 Pcs of Burs | |
5 Pack |
.jpg)
| 601 - Spherical (Round) |
Size/sku |
Avl Qty (Pack) | |
601 FG 030 |
0 |
| 612 - Inverted Cone |
Size/sku |
Avl Qty (Pack) | |
612 FG 055 |
0 |
| 645 - Corundum |
Size/sku |
Avl Qty (Pack) | |
645 FG 028 |
1000 |
| 645F - Cylindrical Side& End Cutting |
Size/sku |
Avl Qty (Pack) | |
645F FG 028 |
7 |
| 661 - Torpedo, Cylindrical |
Size/sku |
Avl Qty (Pack) | |
661 FG 025 |
500 |
| 661F - Torpedo, Cylindrical |
Size/sku |
Avl Qty (Pack) | |
661F FG 025 |
7 |
| 698 - Round |
Size/sku |
Avl Qty (Pack) | |
698 FG 007 |
10 |
We also have for RA.
8RA | |
| 390 | |
| Each Pack Contains 5 Pcs of Burs | |
5 Pack |
.jpg)
| 801- Spherical (Round) | |
| Special round bur highest quality round bur, smallest size up to 009 is available for CA handpiece extensively used by students in the pre-clinical work. |
Size/sku |
Avl Qty (Pack) | |
801RA009 |
300 | |
801 RA 008 |
400 | |
801 RA 010 |
400 |
| 805 - Inverted conical | |
| Very standard bur, full range is available, even short for pediatric patients. Student bur RA of all size 008 to 0012. Specially for students preclinical work. It is definitely top class product. |
Size/sku |
Avl Qty (Pack) | |
805RA008 |
100 | |
805RA009 |
400 | |
805 RA 010 |
400 | |
805 RA 012 |
400 |
| 835 Cylindrical and end cutting | |
| In crown and bridge when you want to reduce the crown, side cutting along with end cutting plays major role to create perfect margin which is most important for the retention. |
Size/sku |
Avl Qty (Pack) | |
835 RA 008 |
200 | |
835 RA 010 |
200 |
| 836 - Cylinder | |
| It can be used in crown reduction more used in cavity cutting, 014 is ideal size for cavity fast cutting. We also have students burs 008 to 010 for cavity cutting of model |
Size/sku |
Avl Qty (Pack) | |
836RA008 |
400 | |
836RA009 |
400 | |
836RA010 |
400 |
| 837 - Cylindrical side and end cutting | |
| Same function as 835 but has longer cutting area for faster preparation. This also end cutting to great perfect margin. This also short shaft to use in molar and for pedo. |
Size/sku |
Avl Qty (Pack) | |
837 RA 012 |
100 | |
837 RA 014 |
200 |
| 846 - Conical (Truncated | |
| This is tapering fissure bur for cavity preparation, we have R A Bur 008 to 016 for students, cavity preparation for preclinical |
Size/sku |
Avl Qty (Pack) | |
846RA008 |
200 | |
846RA009 |
400 | |
846RA010 |
400 | |
846 RA 016 |
300 |
| 847 Cylindrical pointed slender | |
| It is excellent bur for surface finish. If you want finish by low speed surface you can use R A Bur 8484 R, long conical rounded edge, long cutting area, rounded edge does not disturb the margin |
Size/sku |
Avl Qty (Pack) | |
847 RA 016 |
200 |
| 850 - Conical end domed | |
| Used in gross reduction, doomed end does not disturb the margin. RA bur can be used for finish or even for cavity cutting. |
Size/sku |
Avl Qty (Pack) | |
850 RA 018 |
300 |
| 852 conical end domed | |
| Extremely used in the proximal area |
Size/sku |
Avl Qty (Pack) | |
852 RA 014 |
200 | |
852 RA 016 |
200 |
| 859 - Pointed | |
| Finest bur specially for breaking contact area and finish proximal area. |
Size/sku |
Avl Qty (Pack) | |
859 RA 014 |
400 |
| 863 - Cylindrical End pointed long | |
| Crown cutting bur |
Size/sku |
Avl Qty (Pack) | |
863 RA 012 |
400 | |
863 RA 016 |
300 |
| 868 – Torpedo Cylindrical | |
| Fast cutting bur in the crown and bridge technique. |
Size/sku |
Avl Qty (Pack) | |
868 RA 012 |
200 |
| 895 - Bullet | |
| Very useful for gross reduction specially lingual surface, cuspal area. It is also available for RA which can be used for polishing of filling or zirconia etc. |
Size/sku |
Avl Qty (Pack) | |
895 RA 014 |
400 |
--Carbide-Burs.jpg)
Fastest cutting you can use it for metal cutting to remove the fitting or to even cut the bridge.
0CRA | |
| 390 | |
| Each Pack Contains 5 Pcs of Burs | |
5 Pack |
.jpg)
| C1 - Spherical (Round) | |
| Carbide from Jota are of great quality. If you are looking fast cutting, perfect finish, pain free cutting carbide is the best. Cutting edges are so sharp. There is always cut and release system so heat developed is minimum cutting is faster, good cooling effect will be there. C1 is round we have for FG and also for CA |
Size/sku |
Avl Qty (Pack) | |
C1 RA 010 |
0 | |
C1 RA 016 |
21 | |
C1 RA 021 |
50 | |
C1 RA 023 |
20 |
| C2 - Inverted Cone | |
| We also have for RA. |
Size/sku |
Avl Qty (Pack) | |
C2 RA 008 |
50 | |
C2 RA 012 |
50 |
.jpg)
| CQ1 - Spherical (Round) | |
| Very special bur with cross cut, high efficiency cutting. You cut the cavity in no time, pain free, rapid cutting |
Size/sku |
Avl Qty (Pack) | |
CQ1 RA 010 |
400 | |
CQ1 RA 012 |
400 |
| C31 – Fussier Cylindrical(side and end cutting) | |
| This can be used even cavity cutting or crown and bridge. |
Size/sku |
Avl Qty (Pack) | |
C31 RA 008 |
150 | |
C31 RA 010 |
30 | |
C31 RA 012 |
300 |
.jpg)
| C33 - Conical (Truncated) | |
| This is tapering used mainly in cavity cutting, can also be used for surgical. |
Size/sku |
Avl Qty (Pack) | |
C33 RA 008 |
8 | |
C33 RA 010 |
250 | |
C33 RA 012 |
300 |
Longest cutting area in carbide side cutting and also end cutting. It has a great role in crown and bridge practice, once you start using carbide in your practice you really enjoy
6RA0 | |
| 390 | |
| Each Pack Contains 5 Pcs of Burs | |
5 Pack |
.jpg)
| 601 - Spherical (Round) |
Size/sku |
Avl Qty (Pack) | |
601 RA 030 |
0 |
| 612 - Inverted Cone |
Size/sku |
Avl Qty (Pack) | |
612 RA 055 |
0 |
| 638 - Conical Pointed |
Size/sku |
Avl Qty (Pack) | |
638 RA 025 |
0 |
| 645F - Cylindrical Side& End Cutting |
Size/sku |
Avl Qty (Pack) | |
645 RA 028 |
0 |
.jpg)
| 649 - Conical (Truncated) |
Size/sku |
Avl Qty (Pack) | |
649 RA 025 |
10 |
| 661F - Torpedo, Cylindrical |
Size/sku |
Avl Qty (Pack) | |
661F RA 025 |
5 |
| 9831 - Flame |
Size/sku |
Avl Qty (Pack) | |
9831 RA 030 |
0 |
| 9833 - Lens |
Size/sku |
Avl Qty (Pack) | |
9833 RA 100 |
0 |
This can be used even cavity cutting or crown and bridge.
0CHP | |
| 390 | |
| Each Pack Contains 5 Pcs of Burs | |
5 Pack |
.jpg)
| C1HP - Spherical (Round) | |
| Round bur to make any hole in the bore. We have total sizes from 10 to 23. It is excellent bur, fast cutting, and last long |
Size/sku |
Avl Qty (Pack) | |
C1 HP 010 |
100 | |
C1HP012 |
45 | |
C1 HP 014 |
100 | |
C1 HP 016 |
46 | |
C1 HP 018 |
46 | |
C1 HP 021 |
46 | |
C1 HP 023 |
46 |
| C31HP - Fussier Cylindrical (side and end cutting) | |
| Useful for all the surgical procedure |
Size/sku |
Avl Qty (Pack) | |
C31 HP 012 |
46 | |
C31 HP 014 |
46 | |
C31 HP 016 |
46 | |
C31HP023 |
46 |
.jpg)
| C33HP - Conical (Truncated) | |
| Surgical bur for all the procedure |
Size/sku |
Avl Qty (Pack) | |
C33 HP 010 |
46 | |
C33 HP 012 |
0 | |
C33 HP 014 |
0 | |
C33 HP 016 |
0 | |
C33 HP 021 |
3 | |
C33 HP 023 |
0 |
| C36HP - Special | |
| This is very special surgical bur, fast cutting special flutes helps when there is gross reduction, fastest cutting bur |
Size/sku |
Avl Qty (Pack) | |
C36 HP 010 |
3000 | |
C36 HP 014 |
2500 | |
C36HP018 |
1000 |
This is unique bur carbide titanium coated. You can use it anywhere for fast cutting specially for metal cutting old amalgam filling, old crown to cut and remove it, it is fastest cutting bur.
EX2 | |
| 179 | |
| Each Pack Contains 5 pcs of Burs | |
5 Packs | |
| 70 | |
