Description :

CERABIEN™ ZR 

EXTERNAL STAIN reproduces the great variety of color shades observed on the surface of natural teeth.

Description :

Noritake MEISTER CONES is a paper-abrasive material, best suited for the polishing of porcelain teeth, resin teeth, resin denture and metals.

For Porcelain Teeth and Resin Teeth :

For morphological correction, S-Green and S-Yellow cones are used for polishing.

For Resin denture :

After a rough polish with a carbide bur, use L-Red cones for further polishing.

For Hard metals such as Clasp and Burs :

After a rough polish with a carborundum bur, use L-Red and L-Yellow cones for further polishing.

For Soft metals such as Palladium Alloys :

After a rough polish with a carborundum bur, use L-Yellow cones for further polishing.

Description :

The Noritake SHADE GUIDE has been specically designed to match precisely with Noritake Porcelains. It will make shade taking from natural teeth very easy

Basic Concept of Shades :

Noritake Porcelain incorporates less of a greenish color and shifts towards more of pinkish color. This new system promotes better reproduction of the vivid shades of natural teeth. Noritake Shade Guide is developed utilizing this concept. Stains are not used in any Shade Guide to facilitate the correct selection of shades.

Noritake Original Shades :

• NP1.5 - Chroma is between A1 and A2 shades hue corresponds to slightly reddish shades.
• NP2.5 - Chroma is between A2 and A3 shades hue corresponds to slightly reddish shades.
• NW0, NW0.5 - These two shades are useful for the cases where whiter teeth are required due to the patient’s request or to match adjacent bleached teeth.

Product Code :	NSG
Price (Incl. of Tax) :	Rs. 3470
Packaging :	1 Shade Guide Box
Min Order :	1 Box
Available Qty :	400
	3470 3470 Noritake SHADE GUIDE Add to Quote

Description :

PEARL SURFACE Z is a porcelain polishing material for use after the final recontouring. It adds a natural luster to the surface without altering the subtleties in the texture. It is also suitable for polishing hard resin and denture-base acrylic resin.

Product Code :	2210769
Price (Incl. of Tax) :	Rs. 2339
Packaging :	20g per Box
Min Order :	1 Box
Available Qty :	99
	2339 2339 Noritake PEARL SURFACE Z Add to Quote

Description :

Powdering stone models is unnecessary with CAM-Stone N. This special model stone was developed for optoelectronic scanning. It prevents interference from reflections in defined frequency ranges. The quick setting time allows treatment to be completed in one chair side appointment. CAM-Stone N reproduces details exactly, has edge stability and is sharply defined.
 

Characteristics :

For CAD-CAM systems, die models, dental arches, sectioned models, master models in precious and non precious alloys and metal ceramic restorations, check models

Instructions :

Technical Information

• Colour -  Ivory
• Water powder Ratio - 20:100
• Processing time in minutes - 4
• Setting time in minutes - 7-9
• Setting expansion % - 0,06
• Compressive Strength after 1 hour (MPa) - 60
• Compressive Strength dry (MPa) - 90

Product Code :	CSNI
Price (Incl. of Tax) :	Rs. 295
Packaging :	1 Kg bottle
Min Order :	10 Bottle
Available Qty :	25
	295 295 Hinrivest Cam-Stone Ivory Add to Quote

Description :

A thixotropic super hard stone with exceptional hardness made from highly pure natural rock with excellent edge stability, high scratch resistance and breaking strength. Minimum expansion. Especially suitable for high-quality prosthetics. Multipurpose due to its variable water/powder ratio.

Characteristics :

Die models, dental arches, sectioned models, master models in precious and non precious alloys and metal ceramic restorations, check models

Instructions :

Technical Information

• Colour  - Golden Brown 
• Water powder Ratio - 20:100
• Processing Time in minutes - 6-7
• Setting time in minutes - 12-14
• Setting expansion - 0,09
• Compressive Strength after 1 hour (MPa) - 60
• Compressive Strength dry (MPa) - 90

Product Code :	654002
Price (Incl. of Tax) :	Rs. 1250
Packaging :	Packet of 5 kg
Min Order :	4 Packet
Available Qty :	10
	1250 1250 Hinrivest Hinristone Golden Brown Add to Quote

Description :

A thixotropic super hard stone with exceptional hardness made from highly pure natural rock with excellent edge stability, high scratch resistance and breaking strength. Minimum expansion. Especially suitable for high-quality prosthetics. Multipurpose due to its variable water/powder ratio

Characteristics :

Die models, dental arches, sectioned models, master models in precious and non precious alloys and metal ceramic restorations, check models

Instructions :

Technical Information

• Colour  - Light Grey
• Water powder Ratio - 20:100
• Processing Time in minutes - 6-7
• Setting time in minutes - 12-14
• Setting expansion - 0,09
• Comprensive Strength after 1 hour (MPa) - 60
• Compresive Strength dry (MPa) - 90

Product Code :	654032
Price (Incl. of Tax) :	Rs. 1250
Packaging :	Packet of 5 kg
Min Order :	4 Packet
Available Qty :	100
	1250 1250 Hinrivest Hinristone Light Grey Add to Quote

Description :

A phosphate-bonded, graphite-free investment for CoCr frameworks specially developed for the speed heating technique. Suitable for casting all types of dental alloys.

Instructions :

Technical Data

• Mixing fluid: Hinrivest® Liquid 
• Mixing ratio, Powder : fluid: 100 g : 18 ml
•  Mixing under vacuum: 30 - 40 sec.
•  Working time: 4 - 5 min 
• Storage & working temperature: approx. 22°C (Room temperature)
•  Initial setting time: 7 - 10 minutes 
• Setting expansion: approx. 1.00 % (75 % Hinrivest® Liquid)
•  Preheating temperature range for placing in the furnace: 850 - 1.000 °C (if applicable)
•  Place in the hot furnace: 15 min after investing

Description :

A speed casting universal investment for casting all types of precious and non-precious alloys in crown and bridge and combined techniques. Also ideal for direct firing of pressable ceramics. Ultra-fine grains, excellent accuracy and surface quality.

Instructions :

Technical Data

• Mixing liquid Hinrivest® Liquid
•  Mixing ratio, Powder : liquid 100 g : 25 ml
•  Mixing under Vacuum 60 sec Working time 5-7 minutes
•  Working temperature approx. 22 °C (Room temperature)
•  Initial setting time 9-11 minutes 
• Setting expansion > 2.00 %

Description :

Expansion liquid for regulating setting expansion of phosphate-bonded Hinrivest® investments. Can be diluted with distilled water..

Product Code :	INVLQD
Price (Incl. of Tax) :	Rs. 561
Packaging :	1 liter Bottle
Min Order :	5 Bottle
Available Qty :	700
	561 561 Hinrivest Investment Liquid Add to Quote

Description :

For carefully cleaning and condensing sensitive surfaces. (No damage to precious and non precious alloys etc.). Silicosis-free material produced in Germany.

Product Code :	CB125M
Price (Incl. of Tax) :	Rs. 502
Packaging :	1 kg bottle
Min Order :	5 Bottle
Available Qty :	100
	502 502 Hinrivest Glass Beads 125 Micron Add to Quote

Description :

For carefully cleaning and condensing sensitive surfaces. (No damage to precious and nonprecious alloys etc.). Silicosis-free material produced in Germany.

Product Code :	GB50M
Price (Incl. of Tax) :	Rs. 502
Packaging :	1 kg bottle
Min Order :	5 Bottle
Available Qty :	100
	502 502 Hinrivest Glass Beads 50 Micron Add to Quote

Description :

For sandblasting restorations made from any type of alloy. HINRICHS`high-grade corundum does not cause silicosis and complies with health and safety regulations. The sharp-edged grains and extreme hardness guarantee very efficient sandblasting.

Product Code :	SAND250
Price (Incl. of Tax) :	Rs. 338
Packaging :	1 kg bottle
Min Order :	10 Bottle
Available Qty :	100
	338 338 Hinrivest Sand 250 Micron (Aluminium oxide) Add to Quote

Description :

For sandblasting restorations made from any type of alloy. HINRICHS`high-grade corundum does not cause silicosis and complies with health and safety regulations. The sharp-edged grains and extreme hardness guarantee very efficient sandblasting.

Product Code :	SAND50
Price (Incl. of Tax) :	Rs. 231
Packaging :	1 kg bottle
Min Order :	10 Bottle
Available Qty :	500
	231 231 Hinrivest Sand 50 Micron (Aluminium oxide) Add to Quote

Description :

These mounted stones incorporate a unique Sol Gel ceramic abrasive , The Sol Gel abrasive, produced by Sol Gel processing, is both hard and tough. It provides exceptional durability and cut rates in grinding mild, high-carbon and stainless steel as well as many nonferrous alloys

Description :

These mounted stones incorporate a unique Sol Gel ceramic abrasive , The Sol Gel abrasive, produced by Sol Gel processing, is both hard and tough. It provides exceptional durability and cut rates in grinding mild, high-carbon and stainless steel as well as many nonferrous alloys

Description :

These mounted stones incorporate a unique Sol Gel ceramic abrasive , The Sol Gel abrasive, produced by Sol Gel processing, is both hard and tough. It provides exceptional durability and cut rates in grinding mild, high-carbon and stainless steel as well as many nonferrous alloys

Description :

Noritake Super Porcelain EX-3 (henceforth referred to as “EX-3”), a high-quality porcelain system, was developed as a result of the extensive knowledge and ceramic technology of Kuraray Noritake Dental. The fabrication procedures for NORITAKE SUPER PORCELAIN EX-3 are remarkably easy. Its outstanding features are made possible because of its very fine particle size. NORITAKE SUPER PORCELAIN EX-3 is superior to other dental porcelains because its coefficient of thermal expansion (CTE) remains stable during repeated baking. Therefore, when making a long span bridge, each unit may be precisely customized with repeated baking of the entire span with minimal risk of cracking. It is compatible with precious, semi-precious, non-precious and silver-free alloys for metal-ceramic prostheses. Its fluorescence is ideal and it is highly resistant to silver induced greening. This combination of features makes NORITAKE SUPER PORCELAIN EX-3 an ideal choice for porcelain restorations

Features :

Distinctive Features

• Reproduction of the natural tooth color
• Outstanding Resistance to Fractures
• Natural Fluorescence
• Exceptional Handling Characteristics
• Natural & Beautiful - Laminate Veneer Restorations using EX-3 and Screening Porcelain
• Mechanical Properties - Flexural Strength of EX-3 as compared with other leading porcelains

Description :

CZR (Cerabien ZR) is a porcelain system for making all ceramic crowns in use with zirconia frameworks. Single crown made from CZR with zirconia can be used in the posterior as well as anterior due to its extremely high flexural strength. The combination of CZR and zirconia will give you enhanced esthetics and fit with maximum strength for an overall superior restoration

Features :

• Replication of the natural tooth shades
• Excellent compatibility and bonding with Zirconia frameworks
• Ease of handling
• Ideal stability with outstanding resistance to fractures and chipping